Gecko [ nbspublicschool.com ]

Name	Size	Permission
abrt-auto-reporting	10.98 KB	-rwxr-xr-x
abrt-configuration	31.66 KB	-rwxr-xr-x
abrt-dbus	31.22 KB	-rwxr-xr-x
abrt-harvest-pstoreoops	1.32 KB	-rwxr-xr-x
abrt-harvest-vmcore	8.19 KB	-rwxr-xr-x
abrt-install-ccpp-hook	2.85 KB	-rwxr-xr-x
abrt-server	31.11 KB	-rwxr-xr-x
abrtd	31.22 KB	-rwxr-xr-x
accessdb	11.55 KB	-rwxr-xr-x
accton	11.19 KB	-rwxr-xr-x
addgnupghome	3.05 KB	-rwxr-xr-x
addpart	19.69 KB	-rwxr-xr-x
adduser	134.39 KB	-rwxr-xr-x
agetty	48.48 KB	-rwxr-xr-x
alternatives	27.61 KB	-rwxr-xr-x
anacron	35.52 KB	-rwxr-xr-x
apachectl	4.31 KB	-rwxr-xr-x
applygnupgdefaults	2.21 KB	-rwxr-xr-x
arp	63.98 KB	-rwxr-xr-x
arpd	52.98 KB	-rwxr-xr-x
arping	23.19 KB	-rwxr-xr-x
atd	27.17 KB	-rwxr-xr-x
atrun	67 B	-rwxr-xr-x
audispd	39.75 KB	-rwxr-xr-x
auditctl	39.56 KB	-rwxr-xr-x
auditd	125.65 KB	-rwxr-xr-x
augenrules	3.7 KB	-rwxr-xr-x
aureport	105.39 KB	-rwxr-xr-x
ausearch	109.8 KB	-rwxr-xr-x
autrace	15.49 KB	-rwxr-x---
avcstat	11.25 KB	-rwxr-xr-x
badblocks	27.69 KB	-rwxr-xr-x
biosdecode	24.15 KB	-rwxr-xr-x
blkdeactivate	15.97 KB	-r-xr-xr-x
blkdiscard	23.84 KB	-rwxr-xr-x
blkid	77.92 KB	-rwxr-xr-x
blkmapd	43.81 KB	-rwxr-xr-x
blockdev	32.2 KB	-rwxr-xr-x
bpftool	1.9 MB	-rwxr-xr-x
brctl	32.13 KB	-rwxr-xr-x
bridge	77.61 KB	-rwxr-xr-x
build-locale-archive	860.52 KB	-rwx------
cache_check	1.23 MB	-rwxr-xr-x
cache_dump	1.23 MB	-rwxr-xr-x
cache_metadata_size	1.23 MB	-rwxr-xr-x
cache_repair	1.23 MB	-rwxr-xr-x
cache_restore	1.23 MB	-rwxr-xr-x
cache_writeback	1.23 MB	-rwxr-xr-x
capsh	19.43 KB	-rwxr-xr-x
cbq	32.73 KB	-rwxr-xr-x
cfdisk	71.37 KB	-rwxr-xr-x
cgdisk	176.87 KB	-rwxr-xr-x
chcpu	23.7 KB	-rwxr-xr-x
chgpasswd	64.1 KB	-rwxr-xr-x
chkconfig	40.22 KB	-rwxr-xr-x
chpasswd	55.88 KB	-rwxr-xr-x
chronyd	263.08 KB	-rwxr-xr-x
chroot	32.48 KB	-rwxr-xr-x
clock	48.44 KB	-rwxr-xr-x
clockdiff	19.04 KB	-rwxr-xr-x
collectd	210.29 KB	-rwxr-xr-x
collectdmon	14.99 KB	-rwxr-xr-x
consoletype	6.95 KB	-rwxr-xr-x
convertquota	70.88 KB	-rwxr-xr-x
cracklib-check	7.04 KB	-rwxr-xr-x
cracklib-format	246 B	-rwxr-xr-x
cracklib-packer	11.06 KB	-rwxr-xr-x
cracklib-unpacker	7.02 KB	-rwxr-xr-x
crda	11.34 KB	-rwxr-xr-x
create-cracklib-dict	990 B	-rwxr-xr-x
crond	68.48 KB	-rwxr-xr-x
cryptsetup	85.41 KB	-rwxr-xr-x
ctrlaltdel	11.2 KB	-rwxr-xr-x
ctstat	20.09 KB	-rwxr-xr-x
ddns-confgen	19.44 KB	-rwxr-xr-x
debugfs	120.64 KB	-rwxr-xr-x
delpart	19.69 KB	-rwxr-xr-x
depmod	143.24 KB	-rwxr-xr-x
devlink	64.72 KB	-rwxr-xr-x
dhclient	414.34 KB	-rwxr-xr-x
dhclient-script	30.38 KB	-rwxr-xr-x
dm_dso_reg_tool	11.29 KB	-rwxr-xr-x
dmevent_tool	11.29 KB	-rwxr-xr-x
dmeventd	39.56 KB	-r-xr-xr-x
dmfilemapd	19.16 KB	-r-xr-xr-x
dmidecode	120.2 KB	-rwxr-xr-x
dmraid	22.1 KB	-rwxr-xr-x
dmraid.static	22.1 KB	-rwxr-xr-x
dmsetup	149.2 KB	-r-xr-xr-x
dmstats	149.2 KB	-r-xr-xr-x
dnssec-checkds	922 B	-rwxr-xr-x
dnssec-coverage	924 B	-rwxr-xr-x
dnssec-dsfromkey	56.6 KB	-rwxr-xr-x
dnssec-importkey	52.59 KB	-rwxr-xr-x
dnssec-keyfromlabel	60.52 KB	-rwxr-xr-x
dnssec-keygen	64.55 KB	-rwxr-xr-x
dnssec-keymgr	920 B	-rwxr-xr-x
dnssec-revoke	48.45 KB	-rwxr-xr-x
dnssec-settime	56.52 KB	-rwxr-xr-x
dnssec-signzone	105.7 KB	-rwxr-xr-x
dnssec-verify	48.46 KB	-rwxr-xr-x
dosfsck	56.24 KB	-rwxr-xr-x
dosfslabel	52.23 KB	-rwxr-xr-x
dovecot	370.66 KB	-rwxr-xr-x
dovecot_cpshutdown	3.27 KB	-rwxr-xr-x
dracut	55.83 KB	-rwxr-xr-x
dump-acct	19.63 KB	-rwxr-xr-x
dump-utmp	15.47 KB	-rwxr-xr-x
dumpe2fs	23.62 KB	-rwxr-xr-x
e2freefrag	11.15 KB	-rwxr-xr-x
e2fsck	250.55 KB	-rwxr-xr-x
e2image	27.85 KB	-rwxr-xr-x
e2label	69.41 KB	-rwxr-xr-x
e2undo	11.32 KB	-rwxr-xr-x
e4defrag	23.55 KB	-rwxr-xr-x
ebtables	6.85 KB	-rwxr-xr-x
ebtables-restore	10.88 KB	-rwxr-xr-x
ebtables-save	851 B	-rwxr-xr-x
edquota	83.09 KB	-rwxr-xr-x
era_check	1.23 MB	-rwxr-xr-x
era_dump	1.23 MB	-rwxr-xr-x
era_invalidate	1.23 MB	-rwxr-xr-x
era_restore	1.23 MB	-rwxr-xr-x
ether-wake	73.26 KB	-rwxr-xr-x
ethtool	293.87 KB	-rwxr-xr-x
exicyclog	11.01 KB	-rwxr-xr-x
exigrep	10.44 KB	-rwxr-xr-x
exim	1.33 MB	-rwsr-xr-x
exim_checkaccess	4.73 KB	-rwxr-xr-x
exim_dbmbuild	82.09 KB	-rwxr-xr-x
exim_dumpdb	134.47 KB	-rwxr-xr-x
exim_fixdb	168.22 KB	-rwxr-xr-x
exim_lock	64.66 KB	-rwxr-xr-x
exim_tidydb	142.8 KB	-rwxr-xr-x
eximstats	148.01 KB	-rwxr-xr-x
exinext	8.02 KB	-rwxr-xr-x
exiqgrep	5.46 KB	-rwxr-xr-x
exiqsumm	5.07 KB	-rwxr-xr-x
exiwhat	4.32 KB	-rwxr-xr-x
exportfs	76.91 KB	-rwxr-xr-x
faillock	15.02 KB	-rwxr-xr-x
fatlabel	52.23 KB	-rwxr-xr-x
fcgistarter	23.85 KB	-rwxr-xr-x
fdformat	11.27 KB	-rwxr-xr-x
fdisk	195.8 KB	-rwxr-xr-x
filefrag	15.23 KB	-rwxr-xr-x
findfs	11.2 KB	-rwxr-xr-x
firewalld	6.87 KB	-rwxr-xr-x
fixfiles	11.03 KB	-rwxr-xr-x
fixparts	61.65 KB	-rwxr-xr-x
fsadm	23.97 KB	-r-xr-xr-x
fsck	32.12 KB	-rwxr-xr-x
fsck.cramfs	19.57 KB	-rwxr-xr-x
fsck.ext2	250.55 KB	-rwxr-xr-x
fsck.ext3	250.55 KB	-rwxr-xr-x
fsck.ext4	250.55 KB	-rwxr-xr-x
fsck.fat	56.24 KB	-rwxr-xr-x
fsck.minix	73.32 KB	-rwxr-xr-x
fsck.msdos	56.24 KB	-rwxr-xr-x
fsck.vfat	56.24 KB	-rwxr-xr-x
fsck.xfs	433 B	-rwxr-xr-x
fsfreeze	11.23 KB	-rwxr-xr-x
fstrim	40.59 KB	-rwxr-xr-x
fuser	32.34 KB	-rwxr-xr-x
gdisk	184.49 KB	-rwxr-xr-x
genhomedircon	23.77 KB	-rwxr-xr-x
genhostid	6.94 KB	-rwxr-xr-x
genl	52.81 KB	-rwxr-xr-x
genl-ctrl-list	11.27 KB	-rwxr-xr-x
genrandom	11.16 KB	-rwxr-xr-x
getcap	11.13 KB	-rwxr-xr-x
getenforce	7.01 KB	-rwxr-xr-x
getpcaps	7.07 KB	-rwxr-xr-x
getsebool	11.13 KB	-rwxr-xr-x
glibc_post_upgrade.x86_64	772.05 KB	-rwx------
groupadd	85.65 KB	-rwxr-xr-x
groupdel	77.38 KB	-rwxr-xr-x
groupmems	55.97 KB	-rwxr-xr-x
groupmod	85.66 KB	-rwxr-xr-x
grpck	59.93 KB	-rwxr-xr-x
grpconv	51.73 KB	-rwxr-xr-x
grpunconv	51.73 KB	-rwxr-xr-x
grub2-bios-setup	1.03 MB	-rwxr-xr-x
grub2-get-kernel-settings	2.08 KB	-rwxr-xr-x
grub2-install	1.29 MB	-rwxr-xr-x
grub2-macbless	1.02 MB	-rwxr-xr-x
grub2-mkconfig	7.63 KB	-rwxr-xr-x
grub2-ofpathname	225.54 KB	-rwxr-xr-x
grub2-probe	1.03 MB	-rwxr-xr-x
grub2-reboot	4 KB	-rwxr-xr-x
grub2-rpm-sort	258.52 KB	-rwxr-xr-x
grub2-set-default	3.46 KB	-rwxr-xr-x
grub2-setpassword	2.96 KB	-rwxr-xr-x
grub2-sparc64-setup	1.04 MB	-rwxr-xr-x
grubby	71.27 KB	-rwxr-xr-x
gss-server	23.13 KB	-rwxr-xr-x
gssproxy	130.64 KB	-rwxr-xr-x
halt	704.8 KB	-rwxr-xr-x
hardlink	15.29 KB	-rwxr-xr-x
htcacheclean	78.45 KB	-rwxr-xr-x
httpd	2.31 MB	-rwxr-xr-x
hwclock	48.44 KB	-rwxr-xr-x
iconvconfig	22.15 KB	-rwxr-xr-x
iconvconfig.x86_64	22.15 KB	-rwxr-xr-x
ifcfg	2.99 KB	-rwxr-xr-x
ifconfig	80.05 KB	-rwxr-xr-x
ifdown	1.61 KB	-rwxr-xr-x
ifenslave	19.74 KB	-rwxr-xr-x
ifstat	40.6 KB	-rwxr-xr-x
ifup	4.89 KB	-rwxr-xr-x
imunify-notifier	9.8 MB	-rwxr-xr-x
init	1.56 MB	-rwxr-xr-x
insmod	143.24 KB	-rwxr-xr-x
install-info	110.42 KB	-rwxr-xr-x
installkernel	2.69 KB	-rwxr-xr-x
intel-microcode2ucode	11.1 KB	-rwxr-xr-x
ip	459.59 KB	-rwxr-xr-x
ip6tables	91.52 KB	-rwxr-xr-x
ip6tables-restore	91.52 KB	-rwxr-xr-x
ip6tables-save	91.52 KB	-rwxr-xr-x
ipmaddr	19.33 KB	-rwxr-xr-x
ipset	7.02 KB	-rwxr-xr-x
iptables	91.52 KB	-rwxr-xr-x
iptables-restore	91.52 KB	-rwxr-xr-x
iptables-save	91.52 KB	-rwxr-xr-x
iptunnel	23.33 KB	-rwxr-xr-x
irqbalance	48.5 KB	-rwxr-xr-x
isc-hmac-fixup	11.2 KB	-rwxr-xr-x
iw	157.97 KB	-rwxr-xr-x
kexec	166.06 KB	-rwxr-xr-x
key.dns_resolver	19.45 KB	-rwxr-xr-x
killall5	23.17 KB	-rwxr-xr-x
kpartx	39.47 KB	-rwxr-xr-x
kpatch	14.53 KB	-rwxr-xr-x
lchage	15.41 KB	-rwxr-xr-x
ldattach	27.93 KB	-rwxr-xr-x
ldconfig	952.08 KB	-rwxr-xr-x
ledctl	61.97 KB	-rwxr-xr-x
ledmon	62.15 KB	-rwxr-xr-x
lgroupadd	11.28 KB	-rwxr-xr-x
lgroupdel	11.26 KB	-rwxr-xr-x
lgroupmod	15.44 KB	-rwxr-xr-x
lid	15.4 KB	-rwxr-xr-x
lnewusers	15.46 KB	-rwxr-xr-x
lnstat	20.09 KB	-rwxr-xr-x
load_policy	10.97 KB	-rwxr-xr-x
logrotate	68.61 KB	-rwxr-xr-x
logsave	11.27 KB	-rwxr-xr-x
losetup	82.45 KB	-rwxr-xr-x
lpasswd	15.5 KB	-rwxr-xr-x
lshw	895.18 KB	-rwxr-xr-x
lsmod	143.24 KB	-rwxr-xr-x
lsof	150.57 KB	-rwxr-xr-x
lspci	73.67 KB	-rwxr-xr-x
luseradd	15.38 KB	-rwxr-xr-x
luserdel	11.3 KB	-rwxr-xr-x
lusermod	19.43 KB	-rwxr-xr-x
lvchange	2.15 MB	-r-xr-xr-x
lvconvert	2.15 MB	-r-xr-xr-x
lvcreate	2.15 MB	-r-xr-xr-x
lvdisplay	2.15 MB	-r-xr-xr-x
lvextend	2.15 MB	-r-xr-xr-x
lvm	2.15 MB	-r-xr-xr-x
lvmconf	12.55 KB	-r-xr-xr-x
lvmconfig	2.15 MB	-r-xr-xr-x
lvmdiskscan	2.15 MB	-r-xr-xr-x
lvmdump	10.07 KB	-r-xr-xr-x
lvmetad	71.66 KB	-r-xr-xr-x
lvmpolld	64.07 KB	-r-xr-xr-x
lvmsadc	2.15 MB	-r-xr-xr-x
lvmsar	2.15 MB	-r-xr-xr-x
lvreduce	2.15 MB	-r-xr-xr-x
lvremove	2.15 MB	-r-xr-xr-x
lvrename	2.15 MB	-r-xr-xr-x
lvresize	2.15 MB	-r-xr-xr-x
lvs	2.15 MB	-r-xr-xr-x
lvscan	2.15 MB	-r-xr-xr-x
lwresd	768.18 KB	-rwxr-xr-x
makedumpfile	376.52 KB	-rwxr-xr-x
matchpathcon	11.19 KB	-rwxr-xr-x
mdadm	593.45 KB	-rwxr-xr-x
mdmon	331.55 KB	-rwxr-xr-x
mii-diag	20.08 KB	-rwxr-xr-x
mii-tool	19.51 KB	-rwxr-xr-x
mkdict	246 B	-rwxr-xr-x
mkdosfs	28.05 KB	-rwxr-xr-x
mkdumprd	13.99 KB	-rwxr-xr-x
mke2fs	94.08 KB	-rwxr-xr-x
mkfs	11.25 KB	-rwxr-xr-x
mkfs.cramfs	36.16 KB	-rwxr-xr-x
mkfs.ext2	94.08 KB	-rwxr-xr-x
mkfs.ext3	94.08 KB	-rwxr-xr-x
mkfs.ext4	94.08 KB	-rwxr-xr-x
mkfs.fat	28.05 KB	-rwxr-xr-x
mkfs.minix	36.27 KB	-rwxr-xr-x
mkfs.msdos	28.05 KB	-rwxr-xr-x
mkfs.vfat	28.05 KB	-rwxr-xr-x
mkfs.xfs	359.8 KB	-rwxr-xr-x
mkhomedir_helper	19.05 KB	-rwxr-xr-x
mklost+found	11.11 KB	-rwxr-xr-x
mkswap	69.64 KB	-rwxr-xr-x
modinfo	143.24 KB	-rwxr-xr-x
modprobe	143.24 KB	-rwxr-xr-x
modsec-sdbm-util	22.17 KB	-rwxr-x---
mount.fuse	11.1 KB	-rwxr-xr-x
mount.nfs	114.68 KB	-rwsr-xr-x
mount.nfs4	114.68 KB	-rwsr-xr-x
mountstats	40.59 KB	-rwxr-xr-x
mtr	83.18 KB	-rwxr-xr-x
mysqld	244.14 MB	-rwxr-xr-x
mysqld-debug	165.52 MB	-rwxr-xr-x
named	768.18 KB	-rwxr-xr-x
named-checkconf	32.25 KB	-rwxr-xr-x
named-checkzone	32.06 KB	-rwxr-xr-x
named-compilezone	32.06 KB	-rwxr-xr-x
named-journalprint	11.13 KB	-rwxr-xr-x
nameif	15.32 KB	-rwxr-xr-x
netreport	10.96 KB	-rwxr-xr-x
new-kernel-pkg	24.96 KB	-rwxr-xr-x
newusers	93.45 KB	-rwxr-xr-x
nfsdcltrack	40.11 KB	-rwxr-xr-x
nfsidmap	19.32 KB	-rwxr-xr-x
nfsiostat	23.64 KB	-rwxr-xr-x
nfsstat	29.84 KB	-rwxr-xr-x
nl-class-add	11.7 KB	-rwxr-xr-x
nl-class-delete	11.55 KB	-rwxr-xr-x
nl-class-list	11.48 KB	-rwxr-xr-x
nl-classid-lookup	11.29 KB	-rwxr-xr-x
nl-cls-add	11.76 KB	-rwxr-xr-x
nl-cls-delete	11.68 KB	-rwxr-xr-x
nl-cls-list	11.58 KB	-rwxr-xr-x
nl-link-list	11.52 KB	-rwxr-xr-x
nl-pktloc-lookup	11.36 KB	-rwxr-xr-x
nl-qdisc-add	11.6 KB	-rwxr-xr-x
nl-qdisc-delete	11.54 KB	-rwxr-xr-x
nl-qdisc-list	11.63 KB	-rwxr-xr-x
nologin	7.01 KB	-rwxr-xr-x
nscd	180.02 KB	-rwxr-xr-x
nsec3hash	11.13 KB	-rwxr-xr-x
nstat	23.88 KB	-rwxr-xr-x
ntpdate	107.58 KB	-rwxr-xr-x
ntsysv	36.24 KB	-rwxr-xr-x
osd_login	2.55 KB	-rwxr-xr-x
ownership	15.04 KB	-rwxr-xr-x
packer	11.06 KB	-rwxr-xr-x
pam_console_apply	39.69 KB	-rwxr-xr-x
pam_tally2	15.05 KB	-rwxr-xr-x
pam_timestamp_check	10.97 KB	-rwxr-xr-x
paperconfig	4.07 KB	-rwxr-xr-x
parted	77.22 KB	-rwxr-xr-x
partprobe	11.23 KB	-rwxr-xr-x
partx	86.55 KB	-rwxr-xr-x
pdata_tools	1.23 MB	-rwxr-xr-x
pdns_server	98.68 MB	-rwxr-xr-x
pidof	23.17 KB	-rwxr-xr-x
ping6	64.63 KB	-rwxr-xr-x
pivot_root	11.19 KB	-rwxr-xr-x
plipconfig	11.06 KB	-rwxr-xr-x
pm-hibernate	2.86 KB	-rwxr-xr-x
pm-powersave	2.09 KB	-rwxr-xr-x
pm-suspend	2.86 KB	-rwxr-xr-x
pm-suspend-hybrid	2.86 KB	-rwxr-xr-x
pm-utils-bugreport-info.sh	1.47 KB	-rwxr-xr-x
poweroff	704.8 KB	-rwxr-xr-x
ppp-watch	23.2 KB	-rwxr-xr-x
pure-authd	18.37 KB	-rwxr-xr-x
pure-certd	18.27 KB	-rwxr-xr-x
pure-config.pl	4.64 KB	-rwxr-xr-x
pure-ftpd	173.28 KB	-rwxr-xr-x
pure-ftpwho	25.96 KB	-rwxr-xr-x
pure-mrtginfo	9.93 KB	-rwxr-xr-x
pure-quotacheck	13.95 KB	-rwxr-xr-x
pure-uploadscript	14.21 KB	-rwxr-xr-x
pvchange	2.15 MB	-r-xr-xr-x
pvck	2.15 MB	-r-xr-xr-x
pvcreate	2.15 MB	-r-xr-xr-x
pvdisplay	2.15 MB	-r-xr-xr-x
pvmove	2.15 MB	-r-xr-xr-x
pvremove	2.15 MB	-r-xr-xr-x
pvresize	2.15 MB	-r-xr-xr-x
pvs	2.15 MB	-r-xr-xr-x
pvscan	2.15 MB	-r-xr-xr-x
pwck	51.71 KB	-rwxr-xr-x
pwconv	47.57 KB	-rwxr-xr-x
pwhistory_helper	15.44 KB	-rwxr-xr-x
pwunconv	47.59 KB	-rwxr-xr-x
quot	70.66 KB	-rwxr-xr-x
quotacheck	107.29 KB	-rwxr-xr-x
quotaoff	75.03 KB	-rwxr-xr-x
quotaon	75.03 KB	-rwxr-xr-x
quotastats	14.03 KB	-rwxr-xr-x
raid-check	3.7 KB	-rwxr-xr-x
rdisc	23.17 KB	-rwxr-xr-x
rdma	73.42 KB	-rwxr-xr-x
readprofile	15.46 KB	-rwxr-xr-x
reboot	704.8 KB	-rwxr-xr-x
regdbdump	7.12 KB	-rwxr-xr-x
repquota	75.16 KB	-rwxr-xr-x
request-key	19.41 KB	-rwxr-xr-x
resize2fs	48.41 KB	-rwxr-xr-x
resizepart	32.36 KB	-rwxr-xr-x
restorecon	27.16 KB	-rwxr-xr-x
rfkill	11.29 KB	-rwxr-xr-x
rmmod	143.24 KB	-rwxr-xr-x
rndc	35.88 KB	-rwxr-xr-x
rndc-confgen	19.44 KB	-rwxr-xr-x
rngd	42.39 KB	-rwxr-xr-x
rotatelogs	53 KB	-rwxr-xr-x
route	66.6 KB	-rwxr-xr-x
routef	173 B	-rwxr-xr-x
routel	1.59 KB	-rwxr-xr-x
rpc.gssd	88.73 KB	-rwxr-xr-x
rpc.idmapd	48.13 KB	-rwxr-xr-x
rpc.mountd	128.91 KB	-rwxr-xr-x
rpc.nfsd	40.2 KB	-rwxr-xr-x
rpc.rquotad	78.95 KB	-rwxr-xr-x
rpc.statd	97.59 KB	-rwxr-xr-x
rpcbind	60.07 KB	-rwxr-xr-x
rpcdebug	18.05 KB	-rwxr-xr-x
rpcinfo	27.3 KB	-rwxr-xr-x
rsyslogd	648.45 KB	-rwxr-xr-x
rtacct	41.93 KB	-rwxr-xr-x
rtcwake	31.96 KB	-rwxr-xr-x
rtmon	48.67 KB	-rwxr-xr-x
rtpr	37 B	-rwxr-xr-x
rtstat	20.09 KB	-rwxr-xr-x
runlevel	704.8 KB	-rwxr-xr-x
runq	1.33 MB	-rwsr-xr-x
runuser	32.21 KB	-rwxr-xr-x
sa	36.77 KB	-rwxr-xr-x
safe_finger	11.08 KB	-rwxr-xr-x
sasldblistusers2	19.26 KB	-rwxr-xr-x
saslpasswd2	15.09 KB	-rwxr-xr-x
sefcontext_compile	60.53 KB	-rwxr-xr-x
selabel_digest	11.17 KB	-rwxr-xr-x
selabel_lookup	11.14 KB	-rwxr-xr-x
selabel_lookup_best_match	11.16 KB	-rwxr-xr-x
selabel_partial_match	11.09 KB	-rwxr-xr-x
selinux_restorecon	15.21 KB	-rwxr-xr-x
selinuxconlist	11.1 KB	-rwxr-xr-x
selinuxdefcon	11.12 KB	-rwxr-xr-x
selinuxenabled	6.98 KB	-rwxr-xr-x
selinuxexeccon	7.09 KB	-rwxr-xr-x
semanage	42.76 KB	-rwxr-xr-x
semodule	23.77 KB	-rwxr-xr-x
sendmail	13.48 KB	-rwxr-sr-x
service	3.17 KB	-rwxr-xr-x
sestatus	15.02 KB	-rwxr-xr-x
setcap	11.13 KB	-rwxr-xr-x
setenforce	7.05 KB	-rwxr-xr-x
setfiles	27.16 KB	-rwxr-xr-x
setpci	23.4 KB	-rwxr-xr-x
setquota	83.16 KB	-rwxr-xr-x
setregdomain	1.7 KB	-rwxr-xr-x
setsebool	14.99 KB	-rwxr-xr-x
setup	15.38 KB	-rwxr-xr-x
sfdisk	83.25 KB	-rwxr-xr-x
sgdisk	168.33 KB	-rwxr-xr-x
sgpio	15.63 KB	-rwxr-xr-x
showmount	19.56 KB	-rwxr-xr-x
shutdown	704.8 KB	-rwxr-xr-x
sim_server	10.97 KB	-rwxr-xr-x
slattach	42.4 KB	-rwxr-xr-x
sln	743.78 KB	-rwxr-xr-x
sm-notify	68.43 KB	-rwxr-xr-x
smartctl	864.48 KB	-rwxr-xr-x
smartd	670.63 KB	-rwxr-xr-x
snmpd	31.05 KB	-rwxr-xr-x
snmptrapd	31.22 KB	-rwxr-xr-x
sosreport	561 B	-rwxr-xr-x
ss	128.44 KB	-rwxr-xr-x
sshd	836.91 KB	-rwxr-xr-x
sshd-keygen	3.53 KB	-rwxr-xr-x
start-statd	842 B	-rwxr-xr-x
start-stop-daemon	32.96 KB	-rwxr-xr-x
suexec	43.3 KB	-rwsr-xr-x
sulogin	40.53 KB	-rwxr-xr-x
suphp	2.47 MB	-rwsr-x---
sushell	67 B	-rwxr-xr-x
swaplabel	15.31 KB	-rwxr-xr-x
swapoff	15.53 KB	-rwxr-xr-x
swapon	53.29 KB	-rwxr-xr-x
switch_root	15.35 KB	-rwxr-xr-x
sys-unconfig	184 B	-rwxr-xr-x
sysctl	23.57 KB	-rwxr-xr-x
tc	384.66 KB	-rwxr-xr-x
tcpd	36.62 KB	-rwxr-xr-x
tcpdmatch	40.83 KB	-rwxr-xr-x
tcpdump	920.16 KB	-rwxr-xr-x
tcpslice	23.64 KB	-rwxr-xr-x
telinit	704.8 KB	-rwxr-xr-x
thin_check	1.23 MB	-rwxr-xr-x
thin_delta	1.23 MB	-rwxr-xr-x
thin_dump	1.23 MB	-rwxr-xr-x
thin_ls	1.23 MB	-rwxr-xr-x
thin_metadata_size	1.23 MB	-rwxr-xr-x
thin_repair	1.23 MB	-rwxr-xr-x
thin_restore	1.23 MB	-rwxr-xr-x
thin_rmap	1.23 MB	-rwxr-xr-x
thin_trim	1.23 MB	-rwxr-xr-x

Code Editor : fsadm

#!/bin/bash
#
# Copyright (C) 2007-2020 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
#
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU General Public License v.2.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
#
# Author: Zdenek Kabelac <zkabelac at redhat.com>
#
# Script for resizing devices (usable for LVM resize)
#
# Needed utilities:
#   mount, umount, grep, readlink, blockdev, blkid, fsck, xfs_check, cryptsetup
#
# ext2/ext3/ext4: resize2fs, tune2fs
# reiserfs: resize_reiserfs, reiserfstune
# xfs: xfs_growfs, xfs_info
#
# Return values:
#   0 success
#   1 error
#   2 break detected
#   3 unsupported online filesystem check for given mounted fs

set -euE -o pipefail

TOOL=fsadm

_SAVEPATH=$PATH
PATH="/sbin:/usr/sbin:/bin:/usr/sbin:$PATH"

# utilities
TUNE_EXT=tune2fs
RESIZE_EXT=resize2fs
TUNE_REISER=reiserfstune
RESIZE_REISER=resize_reiserfs
TUNE_XFS=xfs_info
RESIZE_XFS=xfs_growfs

MOUNT=mount
UMOUNT=umount
MKDIR=mkdir
RMDIR=rmdir
BLOCKDEV=blockdev
BLKID=blkid
DATE=date
GREP=grep
READLINK=readlink
READLINK_E="-e"
FSCK=fsck
XFS_CHECK=xfs_check
# XFS_REPAIR -n is used when XFS_CHECK is not found
XFS_REPAIR=xfs_repair
CRYPTSETUP=cryptsetup

# user may override lvm location by setting LVM_BINARY
LVM=${LVM_BINARY:-lvm}

YES="${_FSADM_YES-}"
DRY=0
VERB=
FORCE=
EXTOFF=${_FSADM_EXTOFF:-0}
DO_LVRESIZE=0
FSTYPE=unknown
VOLUME=unknown
TEMPDIR="${TMPDIR:-/tmp}/${TOOL}_${RANDOM}$$/m"
DM_DEV_DIR="${DM_DEV_DIR:-/dev}"
BLOCKSIZE=
BLOCKCOUNT=
MOUNTPOINT=
MOUNTED=
REMOUNT=
PROCDIR="/proc"
PROCMOUNTS="$PROCDIR/mounts"
PROCSELFMOUNTINFO="$PROCDIR/self/mountinfo"
NULL="$DM_DEV_DIR/null"

IFS_OLD=$IFS
# without bash $'\n'
NL='
'

tool_usage() {
	echo "${TOOL}: Utility to resize or check the filesystem on a device"
	echo
	echo "  ${TOOL} [options] check <device>"
	echo "    - Check the filesystem on device using fsck"
	echo
	echo "  ${TOOL} [options] resize <device> [<new_size>[BKMGTPE]]"
	echo "    - Change the size of the filesystem on device to new_size"
	echo
	echo "  Options:"
	echo "    -h | --help         Show this help message"
	echo "    -v | --verbose      Be verbose"
	echo "    -e | --ext-offline  unmount filesystem before ext2/ext3/ext4 resize"
	echo "    -f | --force        Bypass sanity checks"
	echo "    -n | --dry-run      Print commands without running them"
	echo "    -l | --lvresize     Resize given device (if it is LVM device)"
	echo "    -c | --cryptresize  Resize given crypt device"
	echo "    -y | --yes          Answer \"yes\" at any prompts"
	echo
	echo "  new_size - Absolute number of filesystem blocks to be in the filesystem,"
	echo "             or an absolute size using a suffix (in powers of 1024)."
	echo "             If new_size is not supplied, the whole device is used."

exit
}

verbose() {
	test -z "$VERB" || echo "$TOOL:" "$@"
}

# Support multi-line error messages
error() {
	for i in "$@" ;  do
		echo "$TOOL: $i" >&2
	done
	cleanup 1
}

dry() {
	if [ "$DRY" -ne 0 ]; then
		verbose "Dry execution" "$@"
		return 0
	fi
	verbose "Executing" "$@"
	$@
}

# Accept as succss also return code 1 with fsck
accept_0_1() {
	$@
	local ret="$?"
	test "$ret" -eq 1 || return "$ret"
	# Filesystem was corrected
}

cleanup() {
	trap '' 2
	# reset MOUNTPOINT - avoid recursion
	test "$MOUNTPOINT" = "$TEMPDIR" && MOUNTPOINT="" temp_umount
	if [ -n "$REMOUNT" ]; then
		verbose "Remounting unmounted filesystem back"
		dry "$MOUNT" "$VOLUME" "$MOUNTED"
	fi
	IFS=$IFS_OLD
	trap 2

test "$1" -eq 2 && verbose "Break detected"

if [ "$DO_LVRESIZE" -eq 2 ]; then
		# start LVRESIZE with the filesystem modification flag
		# and allow recursive call of fsadm
		_FSADM_YES=$YES
		_FSADM_EXTOFF=$EXTOFF
		export _FSADM_YES _FSADM_EXTOFF
		unset FSADM_RUNNING
		test -n "${LVM_BINARY-}" && PATH=$_SAVEPATH
		dry exec "$LVM" lvresize $VERB $FORCE -r -L"${NEWSIZE_ORIG}b" "$VOLUME_ORIG"
	fi

# error exit status for break
	exit "${1:-1}"
}

# convert parameter from Exa/Peta/Tera/Giga/Mega/Kilo/Bytes and blocks
# (2^(60/50/40/30/20/10/0))
decode_size() {
	case "$1" in
	 *[eE]) NEWSIZE=$(( ${1%[eE]} * 1152921504606846976 )) ;;
	 *[pP]) NEWSIZE=$(( ${1%[pP]} * 1125899906842624 )) ;;
	 *[tT]) NEWSIZE=$(( ${1%[tT]} * 1099511627776 )) ;;
	 *[gG]) NEWSIZE=$(( ${1%[gG]} * 1073741824 )) ;;
	 *[mM]) NEWSIZE=$(( ${1%[mM]} * 1048576 )) ;;
	 *[kK]) NEWSIZE=$(( ${1%[kK]} * 1024 )) ;;
	 *[bB]) NEWSIZE=${1%[bB]} ;;
	     *) NEWSIZE=$(( $1 * $2 )) ;;
	esac
	#NEWBLOCKCOUNT=$(round_block_size $NEWSIZE $2)
	NEWBLOCKCOUNT=$(( NEWSIZE / $2 ))

if [ "$DO_LVRESIZE" -eq 1 ]; then
		# start lvresize, but first cleanup mounted dirs
		DO_LVRESIZE=2
		cleanup 0
	fi
}

decode_major_minor() {
	# 0x00000fff00  mask MAJOR
	# 0xfffff000ff  mask MINOR

#MINOR=$(( $1 / 1048576 ))
	#MAJOR=$(( ($1 - ${MINOR} * 1048576) / 256 ))
	#MINOR=$(( $1 - ${MINOR} * 1048576 - ${MAJOR} * 256 + ${MINOR} * 256))

echo "$(( ( $1 >> 8 ) & 4095 )):$(( ( ( $1 >> 12 ) & 268435200 ) | ( $1 & 255 ) ))"
}

# detect filesystem on the given device
# dereference device name if it is symbolic link
detect_fs() {
	test -n "${VOLUME_ORIG-}" || VOLUME_ORIG=$1
	VOLUME=${1/#"${DM_DEV_DIR}/"/}
	VOLUME=$("$READLINK" $READLINK_E "$DM_DEV_DIR/$VOLUME")
	test -n "$VOLUME" || error "Cannot get readlink \"$1\"."
	RVOLUME=$VOLUME
	case "$RVOLUME" in
	  # hardcoded /dev  since udev does not create these entries elsewhere
	  /dev/dm-[0-9]*)
		read -r <"/sys/block/${RVOLUME#/dev/}/dm/name" SYSVOLUME 2>&1 && VOLUME="$DM_DEV_DIR/mapper/$SYSVOLUME"
		read -r <"/sys/block/${RVOLUME#/dev/}/dev" MAJORMINOR 2>&1 || error "Cannot get major:minor for \"$VOLUME\"."
		MAJOR=${MAJORMINOR%%:*}
		MINOR=${MAJORMINOR##*:}
		;;
	  *)
		STAT=$(stat --format "MAJOR=\$((0x%t)) MINOR=\$((0x%T))" "$RVOLUME")
		test -n "$STAT" || error "Cannot get major:minor for \"$VOLUME\"."
		eval "$STAT"
		MAJORMINOR="${MAJOR}:${MINOR}"
		;;
	esac
	# use null device as cache file to be sure about the result
	# not using option '-o value' to be compatible with older version of blkid
	FSTYPE=$("$BLKID" -c "$NULL" -s TYPE "$VOLUME")
	test -n "$FSTYPE" || error "Cannot get FSTYPE of \"$VOLUME\"."
	FSTYPE=${FSTYPE##*TYPE=\"} # cut quotation marks
	FSTYPE=${FSTYPE%%\"*}
	verbose "\"$FSTYPE\" filesystem found on \"$VOLUME\"."
}

# Check that passed mounted MAJOR:MINOR is not matching $MAJOR:MINOR of resized $VOLUME
validate_mounted_major_minor() {
	test "$1" = "$MAJORMINOR" || {
		local REFNAME
		local CURNAME
		REFNAME=$(dmsetup info -c -j "${1%%:*}" -m "${1##*:}" -o name --noheadings 2>/dev/null)
		CURNAME=$(dmsetup info -c -j "$MAJOR" -m "$MINOR" -o name --noheadings 2>/dev/null)
		error "Cannot ${CHECK+CHECK}${RESIZE+RESIZE} device \"$VOLUME\" without umounting filesystem $MOUNTED first." \
		      "Mounted filesystem is using device $CURNAME, but referenced device is $REFNAME." \
		      "Filesystem utilities currently do not support renamed devices."
	}
}

# ATM fsresize & fsck tools are not able to work properly
# when mounted device has changed its name.
# So whenever such device no longer exists with original name
# abort further command processing
check_valid_mounted_device() {
	local MOUNTEDMAJORMINOR
	local VOL
	local CURNAME

VOL=$("$READLINK" $READLINK_E "$1")
	CURNAME=$(dmsetup info -c -j "$MAJOR" -m "$MINOR" -o name --noheadings)
	# more confused, device is not DM....
	local SUGGEST="Possibly device \"$1\" has been renamed to \"$CURNAME\"?"
	test -n "$CURNAME" || SUGGEST="Mounted volume is not a device mapper device???"

test -n "$VOL" ||
		error "Cannot access device \"$1\" referenced by mounted filesystem \"$MOUNTED\"." \
		"$SUGGEST" \
		"Filesystem utilities currently do not support renamed devices."

case "$VOL" in
	  # hardcoded /dev  since kernel does not create these entries elsewhere
	  /dev/dm-[0-9]*)
		read -r <"/sys/block/${VOL#/dev/}/dev" MOUNTEDMAJORMINOR 2>&1 || error "Cannot get major:minor for \"$VOLUME\"."
		;;
	  *)
		STAT=$(stat --format "MOUNTEDMAJORMINOR=\$((0x%t)):\$((0x%T))" "$VOL")
		test -n "$STAT" || error "Cannot get major:minor for \"$VOLUME\"."
		eval "$STAT"
		;;
	esac

validate_mounted_major_minor "$MOUNTEDMAJORMINOR"
}

detect_mounted_with_proc_self_mountinfo() {
	# Check self mountinfo
	# grab major:minor mounted_device mount_point
	MOUNTED=$("$GREP" "^[0-9]* [0-9]* $MAJORMINOR " "$PROCSELFMOUNTINFO" 2>/dev/null | head -1)

# If device is opened and not yet found as self mounted
	# check all other mountinfos (since it can be mounted in cgroups)
	# Use 'find' to not fail on to long list of args with too many pids
	# only 1st. line is needed
	test -z "$MOUNTED" &&
		test "$(dmsetup info -c --noheading -o open -j "$MAJOR" -m "$MINOR")" -gt 0 &&
		MOUNTED=$(find "$PROCDIR" -maxdepth 2 -name mountinfo -print0 |  xargs -0 "$GREP" "^[0-9]* [0-9]* $MAJORMINOR " 2>/dev/null | head -1 2>/dev/null)

# TODO: for performance compare with sed and stop with 1st. match:
	# sed -n "/$MAJORMINOR/ {;p;q;}"

# extract 2nd field after ' - ' separator as mouted device
	MOUNTDEV=$(echo "${MOUNTED##* - }" | cut -d ' ' -f 2)
	MOUNTDEV=$(echo -n -e "$MOUNTDEV")

# extract 5th field as mount point
	# echo -e translates \040 to spaces
	MOUNTED=$(echo "$MOUNTED" | cut -d ' ' -f 5)
	MOUNTED=$(echo -n -e "$MOUNTED")

test -n "$MOUNTED" || return 1   # Not seen mounted anywhere

check_valid_mounted_device "$MOUNTDEV"
}

# With older systems without /proc/*/mountinfo we may need to check
# every mount point as cannot easily depend on the name of mounted
# device (which could have been renamed).
# We need to visit every mount point and check it's major minor
detect_mounted_with_proc_mounts() {
	MOUNTED=$("$GREP" "^$VOLUME[ \\t]" "$PROCMOUNTS")

# for empty string try again with real volume name
	test -z "$MOUNTED" && MOUNTED=$("$GREP" "^$RVOLUME[ \\t]" "$PROCMOUNTS")

MOUNTDEV=$(echo -n -e "${MOUNTED%% *}")
	# cut device name prefix and trim everything past mountpoint
	# echo translates \040 to spaces
	MOUNTED=${MOUNTED#* }
	MOUNTED=$(echo -n -e "${MOUNTED%% *}")

# for systems with different device names - check also mount output
	if test -z "$MOUNTED" ; then
		# will not work with spaces in paths
		MOUNTED=$(LC_ALL=C "$MOUNT" | "$GREP" "^$VOLUME[ \\t]")
		test -z "$MOUNTED" && MOUNTED=$(LC_ALL=C "$MOUNT" | "$GREP" "^$RVOLUME[ \\t]")
		MOUNTDEV=${MOUNTED%% on *}
		MOUNTED=${MOUNTED##* on }
		MOUNTED=${MOUNTED% type *} # allow type in the mount name
	fi

if test -n "$MOUNTED" ; then
		check_valid_mounted_device "$MOUNTDEV"
		return 0  # mounted
	fi

# If still nothing found and volume is in use
	# check every known mount point against MAJOR:MINOR
	if test "$(dmsetup info -c --noheading -o open -j "$MAJOR" -m "$MINOR")" -gt 0 ; then
		while IFS=$'\n' read -r i ; do
			MOUNTDEV=$(echo -n -e "${i%% *}")
			MOUNTED=${i#* }
			MOUNTED=$(echo -n -e "${MOUNTED%% *}")
			STAT=$(stat --format "%d" "$MOUNTED")
			validate_mounted_major_minor "$(decode_major_minor "$STAT")"
		done < "$PROCMOUNTS"
	fi

return 1  # nothing is mounted
}

# check if the given device is already mounted and where
# FIXME: resolve swap usage and device stacking
detect_mounted() {
	if test -e "$PROCSELFMOUNTINFO"; then
		detect_mounted_with_proc_self_mountinfo
	elif test -e "$PROCMOUNTS"; then
		detect_mounted_with_proc_mounts
	else
		error "Cannot detect mounted device \"$VOLUME\"."
	fi
}

# get the full size of device in bytes
detect_device_size() {
	# check if blockdev supports getsize64
	DEVSIZE=$("$BLOCKDEV" --getsize64 "$VOLUME" 2>"$NULL" || true)
	if test -n "$DEVSIZE" ; then
		DEVSIZE=$("$BLOCKDEV" --getsize "$VOLUME" || true)
		test -n "$DEVSIZE" || error "Cannot read size of device \"$VOLUME\"."
		SSSIZE=$("$BLOCKDEV" --getss "$VOLUME" || true)
		test -n "$SSSIZE" || error "Cannot read sector size of device \"$VOLUME\"."
		DEVSIZE=$(( $DEVSIZE * $SSSIZE ))
	fi
}

# round up $1 / $2
# could be needed to gaurantee 'at least given size'
# but it makes many troubles
round_up_block_size() {
	echo $(( ($1 + $2 - 1) / $2 ))
}

temp_mount() {
	dry "$MKDIR" -p -m 0000 "$TEMPDIR" || error "Failed to create $TEMPDIR."
	dry "$MOUNT" "$VOLUME" "$TEMPDIR" || error "Failed to mount $TEMPDIR."
}

temp_umount() {
	dry "$UMOUNT" "$TEMPDIR" || error "Failed to umount \"$TEMPDIR\"."
	dry "$RMDIR" "${TEMPDIR}" || error "Failed to remove \"$TEMPDIR\","
	dry "$RMDIR" "${TEMPDIR%%m}" || error "Failed to remove \"${TEMPDIR%%m}\"."
}

yes_no() {
	echo -n "$@" "? [Y|n] "

if [ -n "$YES" ]; then
		echo y ; return 0
	fi

while read -r -s -n 1 ANS ; do
		case "$ANS" in
		 "y" | "Y" ) echo y ; return 0 ;;
		 "n" | "N") break ;;
		 "" ) if [ -t 1 ] ; then
			echo y ; return 0
		      fi ;;
		esac
	done

echo n
	return 1
}

try_umount() {
	yes_no "Do you want to unmount \"$MOUNTED\"" && dry "$UMOUNT" "$MOUNTED" && return 0
	error "Cannot proceed with mounted filesystem \"$MOUNTED\"."
}

validate_parsing() {
	if test -z "$BLOCKSIZE" || test -z "$BLOCKCOUNT" ; then
		error "Cannot parse $1 output."
	fi
}
####################################
# Resize ext2/ext3/ext4 filesystem
# - unmounted or mounted for upsize
# - unmounted for downsize
####################################
resize_ext() {
	local IS_MOUNTED=0
	detect_mounted && IS_MOUNTED=1

verbose "Parsing $TUNE_EXT -l \"$VOLUME\""
	for i in $(LC_ALL=C "$TUNE_EXT" -l "$VOLUME"); do
		case "$i" in
		  "Block size"*) BLOCKSIZE=${i##*  } ;;
		  "Block count"*) BLOCKCOUNT=${i##*  } ;;
		esac
	done
	validate_parsing "$TUNE_EXT"
	decode_size "$1" "$BLOCKSIZE"
	FSFORCE=$FORCE

if test "$NEWBLOCKCOUNT" -lt "$BLOCKCOUNT" || test "$EXTOFF" -eq 1 ; then
		test "$IS_MOUNTED" -eq 1 && verbose "$RESIZE_EXT needs unmounted filesystem" && try_umount
		REMOUNT=$MOUNTED
		if test -n "$MOUNTED" ; then
			# Forced fsck -f for umounted extX filesystem.
			case "$-" in
			*i*) FLAG=$YES ;;
			*)   FLAG="-p" ;;
			esac
			accept_0_1 dry "$FSCK" -f $FLAG "$VOLUME" || error "Failed to fsck $VOLUME"
		fi
	fi

verbose "Resizing filesystem on device \"$VOLUME\" to $NEWSIZE bytes ($BLOCKCOUNT -> $NEWBLOCKCOUNT blocks of $BLOCKSIZE bytes)"
	dry "$RESIZE_EXT" $FSFORCE "$VOLUME" "$NEWBLOCKCOUNT"
}

#############################
# Resize reiserfs filesystem
# - unmounted for upsize
# - unmounted for downsize
#############################
resize_reiser() {
	detect_mounted && verbose "ReiserFS resizes only unmounted filesystem" && try_umount
	REMOUNT=$MOUNTED
	verbose "Parsing $TUNE_REISER \"$VOLUME\""
	for i in $(LC_ALL=C "$TUNE_REISER" "$VOLUME"); do
		case "$i" in
		  "Blocksize"*) BLOCKSIZE=${i##*: } ;;
		  "Count of blocks"*) BLOCKCOUNT=${i##*: } ;;
		esac
	done
	validate_parsing "$TUNE_REISER"
	decode_size "$1" "$BLOCKSIZE"
	verbose "Resizing \"$VOLUME\" $BLOCKCOUNT -> $NEWBLOCKCOUNT blocks ($NEWSIZE bytes, bs: $NEWBLOCKCOUNT)"
	if [ -n "$YES" ]; then
		echo y | dry "$RESIZE_REISER" -s "$NEWSIZE" "$VOLUME"
	else
		dry "$RESIZE_REISER" -s "$NEWSIZE" "$VOLUME"
	fi
}

########################
# Resize XFS filesystem
# - mounted for upsize
# - cannot downsize
########################
resize_xfs() {
	detect_mounted
	MOUNTPOINT=$MOUNTED
	if [ -z "$MOUNTED" ]; then
		MOUNTPOINT=$TEMPDIR
		temp_mount || error "Cannot mount Xfs filesystem."
	fi
	verbose "Parsing $TUNE_XFS \"$MOUNTPOINT\""
	for i in $(LC_ALL=C "$TUNE_XFS" "$MOUNTPOINT"); do
		case "$i" in
		  "data"*) BLOCKSIZE=${i##*bsize=} ; BLOCKCOUNT=${i##*blocks=} ;;
		esac
	done
	BLOCKSIZE=${BLOCKSIZE%%[^0-9]*}
	BLOCKCOUNT=${BLOCKCOUNT%%[^0-9]*}
	validate_parsing "$TUNE_XFS"
	decode_size "$1" "$BLOCKSIZE"
	if [ "$NEWBLOCKCOUNT" -gt "$BLOCKCOUNT" ]; then
		verbose "Resizing Xfs mounted on \"$MOUNTPOINT\" to fill device \"$VOLUME\""
		dry "$RESIZE_XFS" "$MOUNTPOINT"
	elif [ "$NEWBLOCKCOUNT" -eq "$BLOCKCOUNT" ]; then
		verbose "Xfs filesystem already has the right size"
	else
		error "Xfs filesystem shrinking is unsupported."
	fi
}

# Find active LUKS device on original volume
# 1) look for LUKS device with well-known UUID format (CRYPT-LUKS[12]-<uuid>-<dmname>)
# 2) the dm-crypt device has to be on top of original device (dont't support detached LUKS headers)
detect_luks_device() {
	local _LUKS_VERSION
	local _LUKS_UUID

CRYPT_NAME=""
	CRYPT_DATA_OFFSET=""

_LUKS_VERSION=$("$CRYPTSETUP" luksDump "$VOLUME" 2> /dev/null | "$GREP" "Version:")

if [ -z "$_LUKS_VERSION" ]; then
		verbose "Failed to parse LUKS version on volume \"$VOLUME\""
		return
	fi

_LUKS_VERSION=${_LUKS_VERSION//[Version:[:space:]]/}

_LUKS_UUID=$("$CRYPTSETUP" luksDump "$VOLUME" 2> /dev/null | "$GREP" "UUID:")

if [ -z "$_LUKS_UUID" ]; then
		verbose "Failed to parse LUKS UUID on volume \"$VOLUME\""
		return
	fi

_LUKS_UUID="CRYPT-LUKS$_LUKS_VERSION-${_LUKS_UUID//[UID:[:space:]-]/}-"

CRYPT_NAME=$(dmsetup info -c --noheadings -S "UUID=~^$_LUKS_UUID&&segments=1&&devnos_used='$MAJOR:$MINOR'" -o name)
	test -z "$CRYPT_NAME" || CRYPT_DATA_OFFSET=$(dmsetup table "$CRYPT_NAME" | cut -d ' ' -f 8)

# LUKS device must be active and mapped over volume where detected
	if [ -z "$CRYPT_NAME" ] || [ -z "$CRYPT_DATA_OFFSET" ]; then
		error "Can not find active LUKS device. Unlock \"$VOLUME\" volume first."
	fi
}

######################################
# Resize active LUKS device
# - LUKS must be active for fs resize
######################################
resize_luks() {
	local L_NEWSIZE
	local L_NEWBLOCKCOUNT
	local NAME
	local SHRINK=0

detect_luks_device

NAME=$CRYPT_NAME

verbose "Found active LUKS device \"$NAME\" for volume \"$VOLUME\""

decode_size "$1" 512

if [ $((NEWSIZE % 512)) -gt 0 ]; then
		error "New size is not sector alligned"
	fi

if [ $((NEWBLOCKCOUNT - CRYPT_DATA_OFFSET)) -lt 1 ]; then
		error "New size is smaller than minimum ($(((CRYPT_DATA_OFFSET + 1) * 512)) bytes) for LUKS device $VOLUME"
	fi

L_NEWBLOCKCOUNT=$((NEWBLOCKCOUNT - CRYPT_DATA_OFFSET))
	L_NEWSIZE=$(( L_NEWBLOCKCOUNT * 512))

VOLUME="$DM_DEV_DIR/mapper/$NAME"
	detect_device_size

test "$DEVSIZE" -le "$L_NEWSIZE" || SHRINK=1

if [ $SHRINK -eq 1 ]; then
		# shrink fs on LUKS device first
		resize "$DM_DEV_DIR/mapper/$NAME" "$L_NEWSIZE"b
	fi

# resize LUKS device
	dry "$CRYPTSETUP" resize "$NAME" --size $L_NEWBLOCKCOUNT || error "Failed to resize active LUKS device"

if [ $SHRINK -eq 0 ]; then
		# grow fs on top of LUKS device
		resize "$DM_DEV_DIR/mapper/$NAME" "$L_NEWSIZE"b
	fi
}

detect_crypt_device() {
	local CRYPT_TYPE
	local L_NEWSIZE
	local TMP

which "$CRYPTSETUP" > /dev/null 2>&1 || error "$CRYPTSETUP utility required to resize crypt device"

CRYPT_TYPE=$("$CRYPTSETUP" status "$1" 2> /dev/null | "$GREP" "type:")

test -n "$CRYPT_TYPE" || error "$CRYPTSETUP failed to detect device type on $1."

CRYPT_TYPE=${CRYPT_TYPE##*[[:space:]]}

case "$CRYPT_TYPE" in
	 LUKS[12]|PLAIN)
		verbose "\"$1\" crypt device is type $CRYPT_TYPE"
		;;
	 *)
		error "Unsupported crypt type \"$CRYPT_TYPE\""
	esac

TMP=$NEWSIZE
	decode_size "$2" 512
	L_NEWSIZE=$NEWSIZE
	NEWSIZE=$TMP

if [ $((L_NEWSIZE % 512)) -ne 0 ]; then
		error "New size is not sector alligned"
	fi

CRYPT_RESIZE_BLOCKS=$NEWBLOCKCOUNT

if [ "$DEVSIZE" -ge "$L_NEWSIZE" ]; then
		CRYPT_SHRINK=1
	else
		CRYPT_GROW=1
	fi
}

#################################
# Resize active crypt device
#  (on direct user request only)
#################################
resize_crypt() {
	dry "$CRYPTSETUP" resize "$1" --size $CRYPT_RESIZE_BLOCKS || error "$CRYPTSETUP failed to resize device $1"
}

####################
# Resize filesystem
####################
resize() {
	NEWSIZE=$2
	detect_fs "$1"
	detect_device_size
	verbose "Device \"$VOLUME\" size is $DEVSIZE bytes"
	# if the size parameter is missing use device size
	#if [ -n "$NEWSIZE" -a $NEWSIZE <
	test -z "$NEWSIZE" && NEWSIZE=${DEVSIZE}b
	NEWSIZE_ORIG=${NEWSIZE_ORIG:-$NEWSIZE}
	IFS=$NL
	test -z "${DO_CRYPTRESIZE-}" || detect_crypt_device "$VOLUME_ORIG" "$NEWSIZE_ORIG"
	test -z "${CRYPT_GROW-}" || resize_crypt "$VOLUME_ORIG"

case "$FSTYPE" in
	  ext[234])	CMD=resize_ext ;;
	  "reiserfs")	CMD=resize_reiser ;;
	  "xfs")	CMD=resize_xfs ;;
	  "crypto_LUKS")
		which "$CRYPTSETUP" >"$NULL" 2>&1 || error "$CRYPTSETUP utility required to resize LUKS volume"
		CMD=resize_luks ;;
	  *) error "Filesystem \"$FSTYPE\" on device \"$VOLUME\" is not supported by this tool." ;;
	esac

$CMD $NEWSIZE || error "$FSTYPE resize failed."
	test -z "${CRYPT_SHRINK-}" || resize_crypt "$VOLUME_ORIG"
}

####################################
# Calclulate diff between two dates
#  LC_ALL=C input is expected the
#  only one supported
####################################
diff_dates() {
         echo $(( $("$DATE" -u -d"$1" +%s 2>"$NULL") - $("$DATE" -u -d"$2" +%s 2>"$NULL") ))
}

check_luks() {
	detect_luks_device

check "$DM_DEV_DIR/mapper/$CRYPT_NAME"
}

###################
# Check filesystem
###################
check() {
	detect_fs "$1"
	if detect_mounted ; then
		verbose "Skipping filesystem check for device \"$VOLUME\" as the filesystem is mounted on $MOUNTED";
		cleanup 3
	fi

case "$FSTYPE" in
	  ext[234])
		IFS_CHECK=$IFS
		IFS=$NL
		for i in $(LC_ALL=C "$TUNE_EXT" -l "$VOLUME"); do
			case "$i" in
			  "Last mount"*) LASTMOUNT=${i##*: } ;;
			  "Last checked"*) LASTCHECKED=${i##*: } ;;
			esac
		done
		case "$LASTMOUNT" in
		  *"n/a") ;; # nothing to do - system was not mounted yet
		  *)
			LASTDIFF=$(diff_dates "$LASTMOUNT" "$LASTCHECKED")
			if test "$LASTDIFF" -gt 0 ; then
				verbose "Filesystem has not been checked after the last mount, using fsck -f"
				FORCE="-f"
			fi
			;;
		esac
		IFS=$IFS_CHECK
	esac

case "$FSTYPE" in
	  "xfs") if which "$XFS_CHECK" >"$NULL" 2>&1 ; then
			dry "$XFS_CHECK" "$VOLUME" || error "Xfs check failed."
		 else
			# Replacement for outdated xfs_check
			# FIXME: for small devices we need to force_geometry,
			# since we run in '-n' mode, it shouldn't be problem.
			# Think about better way....
			dry "$XFS_REPAIR" -n -o force_geometry "$VOLUME" || error "Xfs repair failed."
		 fi ;;
	  ext[234]|"reiserfs")
	        # check if executed from interactive shell environment
		case "$-" in
		  *i*) FLAG=$YES ;;
		  *)   FLAG="-p" ;;
		esac
		accept_0_1 dry "$FSCK" $FORCE $FLAG "$VOLUME" || error "Fsck $FSTYPE failed."
		;;
	  "crypto_LUKS")
		which "$CRYPTSETUP" >"$NULL" 2>&1 || error "$CRYPTSETUP utility required."
		check_luks || error "Crypto luks check failed."
		;;
	  *)
		error "Filesystem \"$FSTYPE\" on device \"$VOLUME\" is not supported by this tool." ;;
	esac
}

#############################
# start point of this script
# - parsing parameters
#############################
trap "cleanup 2" 2

# test if we are not invoked recursively
test -n "${FSADM_RUNNING-}" && exit 0

# test some prerequisities
for i in "$TUNE_EXT" "$RESIZE_EXT" "$TUNE_REISER" "$RESIZE_REISER" \
	"$TUNE_XFS" "$RESIZE_XFS" "$MOUNT" "$UMOUNT" "$MKDIR" \
	"$RMDIR" "$BLOCKDEV" "$BLKID" "$GREP" "$READLINK" \
	"$DATE" "$FSCK" "$XFS_CHECK" "$XFS_REPAIR" "$LVM" ; do
	test -n "$i" || error "Required command definitions in the script are missing!"
done

"$LVM" version >"$NULL" 2>&1 || error "Could not run lvm binary \"$LVM\"."
"$READLINK" -e / >"$NULL" 2>&1 || READLINK_E="-f"
TEST64BIT=$(( 1000 * 1000000000000 ))
test "$TEST64BIT" -eq 1000000000000000 || error "Shell does not handle 64bit arithmetic."
echo Y | "$GREP" Y >"$NULL" || error "Grep does not work properly."
test "$("$DATE" -u -d"Jan 01 00:00:01 1970" +%s)" -eq 1 || error "Date translation does not work."

if [ "$#" -eq 0 ] ; then
	tool_usage
fi

CHECK=""
RESIZE=""
NEWSIZE=""

while [ "$#" -ne 0 ]
do
	 case "$1" in
	  "") ;;
	  "-h"|"--help") tool_usage ;;
	  "-v"|"--verbose") VERB="-v" ;;
	  "-n"|"--dry-run") DRY=1 ;;
	  "-f"|"--force") FORCE="-f" ;;
	  "-e"|"--ext-offline") EXTOFF=1 ;;
	  "-y"|"--yes") YES="-y" ;;
	  "-l"|"--lvresize") DO_LVRESIZE=1 ;;
	  "-c"|"--cryptresize") DO_CRYPTRESIZE=1 ;;
	  "check") test -z "${2-}" && error "Missing <device>. (see: $TOOL --help)"
		   CHECK=$2 ; shift ;;
	  "resize") test -z "${2-}" && error "Missing <device>. (see: $TOOL --help)"
		    RESIZE=$2 ; shift
		    if test -n "${2-}" ; then NEWSIZE="${2-}" ; shift ; fi ;;
	  *) error "Wrong argument \"$1\". (see: $TOOL --help)"
	esac
	shift
done

test "$YES" = "-y" || YES=""
test "$EXTOFF" -eq 1 || EXTOFF=0

if [ -n "$CHECK" ]; then
	check "$CHECK"
elif [ -n "$RESIZE" ]; then
	export FSADM_RUNNING="fsadm"
	resize "$RESIZE" "$NEWSIZE"
	cleanup 0
else
	error "Missing command. (see: $TOOL --help)"
fi

${this.title}

Code Editor : fsadm